Phillips 66® Premium Rotary Air Compressor Oil is a premium quality, part-synthetic lubricant developed for use in rotary air compressors operating under moderate to severe service conditions. The part-synthetic formulation provides enhanced thermal and oxidative stability at high temperatures to minimize the formation of sludge and varnish.
PREMIUM ROTARY AIR COMPRESSOR OIL
PREMIUMSYNTHETIC BLEND LUBRICANT
Links of Interest
Features & Benefits
- Part-synthetic formulation for enhanced performance benefits
- Excellent resistance to thermal breakdown at high temperatures
- Excellent oxidation resistance to minimize sludge and varnish formation
- Good wear protection
- Natural detergency
- Protects against rust and corrosion
- Good low-temperature properties
- Good water-separating properties
- Good foam resistance
- Low carbon-forming tendency
Applications
- Oil-flooded rotary screw, rotary lobe, and rotary vane air compressors
- Circulating systems requiring a part-synthetic lubricant
- Industrial equipment operating over a wide temperature range where an inhibited mineral oil is recommended
- Industrial equipment where operating conditions are too severe for conventional mineral oil-based R&O-inhibited circulating oils
Technical Details
- ISO Grade: 46
- ISO Grade: 46
Licenses & Approvals
Premium Rotary Air Compressor Oil meets the requirements of the following industry specifications:#DIN 51506, Air Compressor Lubricant Standard, Grade VDL#DIN 51517 Part 2, Lubricating Oils, Type CL#DIN 51517 Part 3, Lubricating Oils, Type CLP
Additional Details
| ISO Grade | 46 |
| Specific Gravity @ 60°F | 0.875 |
| Density, lbs/gal @ 60°F | 7.29 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 238 (460) |
| Pour Point, °C (°F) | -36 (-33) |
| Viscosity | |
| cSt @ 40°C | 46 |
| cSt @ 100°C | 6.7 |
| SUS @ 100°F | 238 |
| SUS @ 210°F | 48.7 |
| Viscosity Index | 97 |
| Acid Number, ASTM D974, mg KOH/g | 0.17 |
| Demulsibility, ASTM D1401, minutes to pass | 15 |
| Foam Test, ASTM D892, Seq. I, mL | 15/0 |
| Oxidation Stability, RPVOT, ASTM D2272, minutes | 2100 |
| Rust Test, ASTM D665 A&B | Pass |
